dating gifts and collectibles - Updating bios using asus ez flash
Here we will show you how to update BIOS ASUS motherboard for Windows 7/8/10. Check your ASUS PC system information before update BIOS version on motherboard.Press Win R and type msinfo32 in the dialogue box then hit enter. Usually you just need to hit the F12 or ESC key repeatedly on bootup. Once the updating process completed, reboot your ASUS machine.
Isolated this chip by covering other electronic components by using alufoil with capton tapes. Heated GPU using hot air gun by monitoring the temperature. Needed to heat it up to 220deg celcius and maintain it for 1-2min.
If you don't have the technical expertise, I suggest you bring your laptop to an expert computer technician. reposting Dhanushka_Liyanage solution: "I had similar problem with Asus K43Jr model. HDD worked only for few seconds and HDD LED went off.
I've tried using the usb flash,but it ends with 'this is not a proper bios folder'.
I probaly wont do it,but i'd love to know just for future reference.
Basically it may weaken solder contacts and with reflow you can fix it. Hope this help someone who need some info." Sorry for my English (google translator). Only need to press the power button for a minute or more. It worked for my notebook Asus Q550L, but I suspect all about Asus UEFI boot.
Because reflow solution may work only if you have any overheating issues with GPU. To solve it have to do what he says "penplez05", but, WITHOUT DISCONNECT NOTHING. BIOS is stored on a chip on every ASUS motherboard, initializing all other devices like CPU, GPU when power on and passing controls over boot loader that boots your PC to Windows.It’s not always necessary to update BIOS on ASUS laptops or desktops unless you have a reason to, like fixing bugs, improving system stability. Then try to turn on the device using only the charger ( do not attach the battery). Otherwise, open up the bottom casing of your laptop where you can see Hard drive and RAM units. If it didn't work either, then it may be the RAM slots causing this problem. The start screen appeared so I was able to eliminate any problem with the screen itself. (Read temp profile for chip for more accurate info) 8. This problem is related to RAM units First you should turn off your device, unplug the charger and remove the battery Then hold the power button for at least 30 seconds. I disconnected the hard drive then booted up the laptop. Isolated this chip by covering other electronic components by using alufoil with capton tapes. Heated GPU using hot air gun by monitoring the temperature. Needed to heat it up to 220deg celcius and maintain it for 1-2min. Where it clearly says do not turn off your computer updating. I hope you got it back up without too much trouble. In my case a Windows 8.1 update was interrupted while it was being installed. All what you have to do is just test your RAM or RAM slots by removing the power then take all the RAM out then place them one at the time and switch between the RAM slots and you will figure out witch RAM or witch slot is not working and you will be back on track.